HPE Storage Users Group https://www.3parug.com/ |
|
Service Processor Status https://www.3parug.com/viewtopic.php?f=17&t=364 |
Page 1 of 1 |
Author: | jcpetro [ Tue Jul 16, 2013 2:04 pm ] |
Post subject: | Service Processor Status |
I have two V400's and the file transfers seem to get stuck from time to time. I am told by HP that this is a bug, and the current fix is to restart the SP's. Does anyone know if there is a good way to script this command line style? if so, is there anything I should be looking out for? I am thinking about writing a script to dump this status into our monitoring tools. Thanks in advance!! |
Author: | Richard Siemers [ Fri Jul 19, 2013 12:58 pm ] |
Post subject: | Re: Service Processor Status |
I have that problem too and would benefit from a script that will detect a hung transfer, and queue a reboot. I know of 3 ways to interface with the SP, one is through the browser front end, and the other is through SSH, which launches you into a 3PAR menu driven shell that keeps us users out of the root OS... and the last is SCP/SFTP. Perhaps you can grab the transfer logs and parse for trouble. |
Author: | jcpetro [ Wed Feb 26, 2014 3:24 pm ] |
Post subject: | Re: Service Processor Status |
Ok, so I have been looking at this off and on for a bit, and since I had some time, I picked it back up again. I was actually able to get a dump of the "status" for the file transfer using curl. This is the command I used: curl -u username:password http://itsvmsan04-sp/sp/get_xfer.php That wil dump the entire status page, then you can write something to parse out the parts you need. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |