HPE Storage Users Group
https://www.3parug.com/

Present VV using fiber channel and iscsi at same time
https://www.3parug.com/viewtopic.php?f=18&t=169		 Page 1 of 1
Author:  zuwairi14 [ Wed Jul 04, 2012 2:44 am ]
Post subject:  Present VV using fiber channel and iscsi at same time
Hi,

I have fiber channel and iscsi connectivity on F400

Can I present VV to the server using fiber channel and iscsi at the same time?

any effect on the server to determine the LUN
Author:  Fastjack [ Mon Jul 09, 2012 3:52 am ]
Post subject:  Re: Present VV using fiber channel and iscsi at same time
Quote:
I have fiber channel and iscsi connectivity on F400
Can I present VV to the server using fiber channel and iscsi at the same time?


If it works the same way as on a V-class then Yes, you can present a volume via both ways at the same time.
Author:  zuwairi14 [ Mon Jul 09, 2012 10:18 pm ]
Post subject:  Re: Present VV using fiber channel and iscsi at same time
Hi,

what u mean by works the same way as on a V-class?
Author:  Fastjack [ Tue Jul 10, 2012 5:46 am ]
Post subject:  Re: Present VV using fiber channel and iscsi at same time
zuwairi14 wrote:
what u mean by works the same way as on a V-class?

I just meant that you are working on an F400 while I have experience only with a V800 (V-class). So my information may not apply to you (but it probably does).
Author:  Christian [ Tue Jul 10, 2012 8:59 am ]
Post subject:  Re: Present VV using fiber channel and iscsi at same time
V-Class , T-Class , F-Class if you can do it on a V-Class you can do it on a F-Class.
Same software only a bit different hardware :)
Author:  Richard Siemers [ Fri Aug 17, 2012 1:39 am ]
Post subject:  Re: Present VV using fiber channel and iscsi at same time
Yes it should work.... I recommend making the FC path the primary and the iSCSI path a failover only... I wouldn't recommend round robin.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/