| HPE Storage Users Group https://www.3parug.com/ |
|
| 3par file persona error https://www.3parug.com/viewtopic.php?f=18&t=2728 |
Page 1 of 1 |
| Author: | sanjac [ Mon Nov 27, 2017 8:08 am ] |
| Post subject: | 3par file persona error |
I was trying da enable file persona on my 3par 8200 but i get the folowing error: 2017-11-27 14:04:44 CET Created 2017-11-27 14:04:49 CET Start user operation 2017-11-27 14:04:49 CET Configure File Persona MTU on (3Par8200) 2017-11-27 14:04:49 CET Executing setfs mtu 1500 operation on the array 2017-11-27 14:04:50 CET MTU value 1500 cannot be set for node 0. NIC interface not found on node 0. Proceeding with other nodes. MTU value 1500 cannot be set for node 1. NIC interface not found on node 1. Proceeding with other nodes. 2017-11-27 14:04:50 CET Configure File Persona bond mode on (3Par8200) 2017-11-27 14:04:50 CET Executing setfs bond 1 operation on the array 2017-11-27 14:04:50 CET Bond mode 1 cannot be set for node 0. NIC interface not found on node 0. Proceeding with other nodes. Bond mode 1 cannot be set for node 1. NIC interface not found on node 1. Proceeding with other nodes. 2017-11-27 14:04:50 CET Configure File Persona AD settings on (3Par8200) 2017-11-27 14:04:50 CET Executing setfs ad operation on the array 2017-11-27 14:05:37 CET could not join the domain: NERR_DCNotFound 2017-11-27 14:05:37 CET Failed: Failed |
|
| Author: | MammaGutt [ Mon Nov 27, 2017 10:48 am ] |
| Post subject: | Re: 3par file persona error |
What 3PAR OS version are you running? If it is 3.2.2mu3 or above, could you share the PersonaProfile output from showsys -d ? |
|
| Author: | sanjac [ Wed Nov 29, 2017 8:20 am ] |
| Post subject: | Re: 3par file persona error |
3.2.2 mu2 |
|
| Author: | MammaGutt [ Wed Nov 29, 2017 9:32 am ] |
| Post subject: | Re: 3par file persona error |
I'm just taking a stab at this, with no real experience myself. 2017-11-27 14:04:50 CET MTU value 1500 cannot be set for node 0. NIC interface not found on node 0. Proceeding with other nodes. MTU value 1500 cannot be set for node 1. NIC interface not found on node 1. Proceeding with other nodes. At this point it is unable to find any NIC interfaces it can use for File Persona. All other error messages below are related to this or the fact that the file persona network is not up. Are you using the on-node RCIP port for FP or do you have a supported add-on card for File Persona? |
|
| Author: | sanjac [ Fri Dec 01, 2017 2:26 am ] |
| Post subject: | Re: 3par file persona error |
I'm using on node RCIP I wasn't able to solve the problem so deleted file persona |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|