HPE Storage Users Group https://www.3parug.com/ |
|
F400 trouble with SP https://www.3parug.com/viewtopic.php?f=18&t=2772 |
Page 1 of 1 |
Author: | evan631 [ Tue Jan 23, 2018 9:16 pm ] |
Post subject: | F400 trouble with SP |
I have an F400 that appears to have SP issues. I logged into the console and noticed I had two failed drives, but I never received notifications. I logged into the SP and see some warnings: Warning: SPup2date is currently not running. Warning: spcollect - environ is currently not running for Warning: spcollect - eeprom is currently not running for Warning: spcollect - biosmsg is currently not running for Warning: spcollect - config is currently not running for Warning: spcollect - perfdb is currently not running for Warning: spcollect - memdata is currently not running for Warning: stAnalyze is currently not running. Warning: stNotify is currently not running. I restarted the SP and still getting these warnings. I also have some functionality issues (see attached doc) - the 3par yellow buttons are not displayed - when you go into a menu selection, it does not populate the screen, but rather a small frame. Any thoughts what this could be? Attachment: Thanks -Evan |
Author: | evan631 [ Wed Jan 24, 2018 4:01 pm ] |
Post subject: | Re: F400 trouble with SP |
I think I found my issue. I believe my SP is out of space. In a splor log I see the following: Jan 24 04:47:23 SP12044 STlogger[1981]: [STlogger] Failed to update current log number#012. Reason: Failed to write temp GDDA file '/var/opt/st/GDDA.new': No space left on device However, I am not sure if my SP is out of space or because the system does not phone home to 3par anymore and I believe it is still configured to do so. The system is no longer supported by HP. Do you think the SP is out of space? If so anyway of freeing up space? Thanks -Evan evan631 wrote: I have an F400 that appears to have SP issues. I logged into the console and noticed I had two failed drives, but I never received notifications.
I logged into the SP and see some warnings: Warning: SPup2date is currently not running. Warning: spcollect - environ is currently not running for Warning: spcollect - eeprom is currently not running for Warning: spcollect - biosmsg is currently not running for Warning: spcollect - config is currently not running for Warning: spcollect - perfdb is currently not running for Warning: spcollect - memdata is currently not running for Warning: stAnalyze is currently not running. Warning: stNotify is currently not running. I restarted the SP and still getting these warnings. I also have some functionality issues (see attached doc) - the 3par yellow buttons are not displayed - when you go into a menu selection, it does not populate the screen, but rather a small frame. Any thoughts what this could be? Attachment: 3parissues.docx Thanks -Evan |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |