HPE Storage Users Group https://www.3parug.com/ |
|
Replacing a failed drive in a 7200 https://www.3parug.com/viewtopic.php?f=18&t=2804 |
Page 1 of 1 |
Author: | 3parzx [ Tue Feb 20, 2018 3:23 pm ] |
Post subject: | Replacing a failed drive in a 7200 |
We have a failed drive in our 3par unit... It looks like the drive of ours was brought offline on February 11th with a servicemag start command. Is there any reason to run the command again since its offline? What will a servicemag start command do to the drive now? The magazine was successfully brought offline by a servicemag start command. The command completed at Sun Feb 11 06:50:48 2018. servicemag start -wait -pdid 51 – Succeeded The info shows nothing on the drive when I do a showpd –space command Id CagePos Type -State- Size Volume Spare Free Unavail Failed 51 3:9:0 FC failed 838656 0 0 0 0 838656 --------------------------------------------------------------- 1 total 838656 0 0 0 0 838656 However when I do a showpd –c it shows some chunklets? ------- Normal Chunklets -------- ---- Spare Chunklets ---- - Used - -------- Unused -------- - Used - ---- Unused ---- Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail 51 3:9:0 FC failed 819 0 0 0 722 0 63 0 0 0 15 19 ---------------------------------------------------------------------------------------- 1 total 819 0 0 0 722 0 63 0 0 0 15 19 Is this drive safe to remove? And install the new one? |
Author: | 3parzx [ Tue Feb 20, 2018 4:17 pm ] |
Post subject: | Re: Replacing a failed drive in a 7200 |
Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail 51 3:9:0 FC failed 819 0 0 0 722 0 63 0 0 0 15 19 ---------------------------------------------------------------------------------------- 1 total 819 0 0 0 722 0 63 0 0 0 15 19 copy paste kind of made that messy but I am seeing Used OK and Used FAIL as 0 |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |