MammaGutt wrote:
What does checkhealth -svc -detail say?
Looks to me like all drives in cage1 has a problem so I'm guessing the problem is with the cage and not the 18 drives.
hmm i think you are right
Code:
HP3PAR_7200 cli% checkhealth -svc -detail
Checking alert
Checking ao
Checking cabling
Checking cage
Checking dar
Checking date
Checking file
Checking ld
Checking host
Checking license
Checking network
Checking node
Checking pd
Checking pdch
Checking port
Checking qos
Checking rc
Checking snmp
Checking task
Checking vlun
Checking vv
Checking sp
Component -------------------Description-------------------- Qty
Alert New alerts 4
Cabling Wrong I/O module or port 2
host Hosts not seen by multiple nodes 9
Host Host ports not configured for virtual port support 4
Network Too few working admin network connections 1
PD PDs that are degraded 18
QoS Unable to check QoS 1
Component --Identifier-- ----------------------------------------------------------------------------------------Description----------------------------------------------------------------------------------------
Alert sw_cp:1:FC_r5 CPG 1 (FC_r5) could not grow with its normal grow parameters.-The following parameters were used: createald -wait 0 -cpsd FC_r5 -ssz 6 -ha mag -t r5 -p -devtype NL -n tp-1-sd-2 -sz 8192
Alert sw_sysmgr Total FC raw space usage at 6449G (above 95% of total 6528G)
Alert sw_sysmgr Total NL raw space usage at 21228G (above 95% of total 21648G)
Alert sw_os An Update is Available
Cabling cage1 Cable in (cage1, I/O 0, DP-1) should be in (cage1, I/O 1, DP-1)
Cabling cage1 Cable in (cage1, I/O 1, DP-1) should be in (cage1, I/O 0, DP-1)
host SRV_ESXi01_112 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESX06_92 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESX3_68 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESX2_107 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESX04_106 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESXi11_67 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESXi12_66 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESXi09_70 Host is not seen by multiple nodes, only seen from node 1
host SRV_ESXi09_74 Host is not seen by multiple nodes, only seen from node 1
Host Port:1:1:1 Port WWN not found on FC Fabric attached to Port:0:1:1
Host Port:1:1:2 Port WWN not found on FC Fabric attached to Port:0:1:2
Host Port:0:1:1 Port WWN not found on FC Fabric attached to Port:1:1:1
Host Port:0:1:2 Port WWN not found on FC Fabric attached to Port:1:1:2
Network -- Node 1 has no admin network link detected
PD disk:18 Degraded States: Invalid_connection
PD disk:19 Degraded States: Invalid_connection
PD disk:20 Degraded States: Invalid_connection
PD disk:21 Degraded States: Invalid_connection
PD disk:22 Degraded States: Invalid_connection
PD disk:23 Degraded States: Invalid_connection
PD disk:24 Degraded States: Invalid_connection
PD disk:25 Degraded States: Invalid_connection
PD disk:26 Degraded States: Invalid_connection
PD disk:27 Degraded States: Invalid_connection
PD disk:28 Degraded States: Invalid_connection
PD disk:29 Degraded States: Invalid_connection
PD disk:30 Degraded States: Invalid_connection
PD disk:31 Degraded States: Invalid_connection
PD disk:32 Degraded States: Invalid_connection
PD disk:33 Degraded States: Invalid_connection
PD disk:34 Degraded States: Invalid_connection
PD disk:35 Degraded States: Invalid_connection
QoS -- Unable to check QoS - This system is not licensed for System Reporter features
HP3PAR_7200 cli%
i think the cables connections are incorrect ,
Cabling cage1 Cable in (cage1, I/O 0, DP-1) should be in (cage1, I/O 1, DP-1)
Cabling cage1 Cable in (cage1, I/O 1, DP-1) should be in (cage1, I/O 0, DP-1)