HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: SSMC 3.4 Question
PostPosted: Thu Oct 04, 2018 4:01 pm 

Joined: Fri Jan 20, 2017 9:39 am
Posts: 58
answering me own question: level 2 support says an 8200 is not an all flash array even though it has all SSDs.

That's a little disappointing


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 09, 2018 7:11 am 

Joined: Thu Dec 05, 2013 9:44 am
Posts: 33
I have several 8200s, two of them are "all SSD" and I can see the saturation data automatically - see attached. I have them upgraded to 3.3.1 MU2


Attachments:
8200.PNG
8200.PNG [ 17.05 KiB | Viewed 17108 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 09, 2018 7:53 am 
User avatar

Joined: Tue Oct 07, 2014 8:34 am
Posts: 214
Location: Germany
cbuxton wrote:
I have several 8200s, two of them are "all SSD" and I can see the saturation data automatically - see attached. I have them upgraded to 3.3.1 MU2


Same for me.
Have Systems with
SSD & SATA > No Analytics
SSD only > Analytics

HPE say:
"On initial launch only arrays which are all SSD’s are supported with Analytics"

They do not say "All-Flash Array only".


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 09, 2018 10:15 am 

Joined: Fri Jan 20, 2017 9:39 am
Posts: 58
So HPE support is full of it and has no idea why my 8200 isn't showing data you say? Why am I not surprised.... let the fight continue I guess


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Wed Oct 10, 2018 1:18 am 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1570
Location: Europe
Kyle wrote:
So HPE support is full of it and has no idea why my 8200 isn't showing data you say? Why am I not surprised.... let the fight continue I guess


Is your system reporter running? (ie, can you create historical performance graphs)

I think "all you need" is SR running ... but it could be that you also need WSAPI running..

(showsr and showwsapi)

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Wed Oct 10, 2018 2:39 pm 

Joined: Fri Jan 20, 2017 9:39 am
Posts: 58
MammaGutt wrote:
Is your system reporter running? (ie, can you create historical performance graphs)


SR seems to be running. The command looks the same between the working and non working arrays. I made a test report in SSMC using one of the hisotry performance reports and set a 2 week period and I see the data.

MammaGutt wrote:
I think "all you need" is SR running ... but it could be that you also need WSAPI running..


Don't think WSAPI is needed. It's off on the working array. The thing i did note is the command returned right away on the working one but took a few seconds on the non working way (same thing when I login via SSH, it takes a few seconds before i get the user and password prompts but it's been like that for a while)


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Mon Oct 29, 2018 4:05 pm 

Joined: Fri Jan 20, 2017 9:39 am
Posts: 58
My case is slowly making it's way through HPE to try and figure this out but was wondering what license you guys have on your 8200. Is it the old style one or the new all inclusive one? I doubt that's the issue but who knows...


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 30, 2018 7:29 am 

Joined: Wed Nov 20, 2013 8:47 am
Posts: 10
I've got the same issue with 2 8200's, however these array's have both flash and spinning disks.

Martijn


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 30, 2018 7:59 am 

Joined: Thu Dec 05, 2013 9:44 am
Posts: 33
Mine are licensed with the all-inclusive style.


Top
 Profile  
Reply with quote  
 Post subject: Re: SSMC 3.4 Question
PostPosted: Tue Oct 30, 2018 8:40 am 

Joined: Wed Nov 09, 2011 12:01 pm
Posts: 392
Kyle wrote:
My case is slowly making it's way through HPE to try and figure this out but was wondering what license you guys have on your 8200. Is it the old style one or the new all inclusive one? I doubt that's the issue but who knows...


I've only added 3 systems to SSMC 3.4 so far and they all appear to have the analytics pages;

8200 3.2.2 eMU4 Single Inclusive SSD only
9450 3.3.1 MU2 Multi Inclusive SSD only
9450 3.3.1 MU2 Multi Inclusive SSD only

All came with Inclusive license, have two 10400 (no SSD) on old license model and two 8400 (SSD only) that got converted to Inclusive but not tried these yet.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt