HPE Storage Users Group
https://www.3parug.com/

SSMC 3.4 Question
https://www.3parug.com/viewtopic.php?f=18&t=2989		 Page 2 of 2
Author:  Kyle [ Thu Oct 04, 2018 4:01 pm ]
Post subject:  Re: SSMC 3.4 Question
answering me own question: level 2 support says an 8200 is not an all flash array even though it has all SSDs.

That's a little disappointing
Author:  cbuxton [ Tue Oct 09, 2018 7:11 am ]
Post subject:  Re: SSMC 3.4 Question
I have several 8200s, two of them are "all SSD" and I can see the saturation data automatically - see attached. I have them upgraded to 3.3.1 MU2

Attachments:
8200.PNG
8200.PNG [ 17.05 KiB | Viewed 17296 times ]
Author:  cali [ Tue Oct 09, 2018 7:53 am ]
Post subject:  Re: SSMC 3.4 Question
cbuxton wrote:
I have several 8200s, two of them are "all SSD" and I can see the saturation data automatically - see attached. I have them upgraded to 3.3.1 MU2


Same for me.
Have Systems with
SSD & SATA > No Analytics
SSD only > Analytics

HPE say:
"On initial launch only arrays which are all SSD’s are supported with Analytics"

They do not say "All-Flash Array only".
Author:  Kyle [ Tue Oct 09, 2018 10:15 am ]
Post subject:  Re: SSMC 3.4 Question
So HPE support is full of it and has no idea why my 8200 isn't showing data you say? Why am I not surprised.... let the fight continue I guess
Author:  MammaGutt [ Wed Oct 10, 2018 1:18 am ]
Post subject:  Re: SSMC 3.4 Question
Kyle wrote:
So HPE support is full of it and has no idea why my 8200 isn't showing data you say? Why am I not surprised.... let the fight continue I guess


Is your system reporter running? (ie, can you create historical performance graphs)

I think "all you need" is SR running ... but it could be that you also need WSAPI running..

(showsr and showwsapi)
Author:  Kyle [ Wed Oct 10, 2018 2:39 pm ]
Post subject:  Re: SSMC 3.4 Question
MammaGutt wrote:
Is your system reporter running? (ie, can you create historical performance graphs)


SR seems to be running. The command looks the same between the working and non working arrays. I made a test report in SSMC using one of the hisotry performance reports and set a 2 week period and I see the data.

MammaGutt wrote:
I think "all you need" is SR running ... but it could be that you also need WSAPI running..


Don't think WSAPI is needed. It's off on the working array. The thing i did note is the command returned right away on the working one but took a few seconds on the non working way (same thing when I login via SSH, it takes a few seconds before i get the user and password prompts but it's been like that for a while)
Author:  Kyle [ Mon Oct 29, 2018 4:05 pm ]
Post subject:  Re: SSMC 3.4 Question
My case is slowly making it's way through HPE to try and figure this out but was wondering what license you guys have on your 8200. Is it the old style one or the new all inclusive one? I doubt that's the issue but who knows...
Author:  mkaaden [ Tue Oct 30, 2018 7:29 am ]
Post subject:  Re: SSMC 3.4 Question
I've got the same issue with 2 8200's, however these array's have both flash and spinning disks.

Martijn
Author:  cbuxton [ Tue Oct 30, 2018 7:59 am ]
Post subject:  Re: SSMC 3.4 Question
Mine are licensed with the all-inclusive style.
Author:  ailean [ Tue Oct 30, 2018 8:40 am ]
Post subject:  Re: SSMC 3.4 Question
Kyle wrote:
My case is slowly making it's way through HPE to try and figure this out but was wondering what license you guys have on your 8200. Is it the old style one or the new all inclusive one? I doubt that's the issue but who knows...


I've only added 3 systems to SSMC 3.4 so far and they all appear to have the analytics pages;

8200 3.2.2 eMU4 Single Inclusive SSD only
9450 3.3.1 MU2 Multi Inclusive SSD only
9450 3.3.1 MU2 Multi Inclusive SSD only

All came with Inclusive license, have two 10400 (no SSD) on old license model and two 8400 (SSD only) that got converted to Inclusive but not tried these yet.
Page 2 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/