HPE Storage Users Group https://www.3parug.com/ |
|
3PAR 8200/8200/8440 Xeon Processors https://www.3parug.com/viewtopic.php?f=18&t=3155 |
Page 1 of 1 |
Author: | adam [ Wed Apr 10, 2019 12:58 am ] |
Post subject: | 3PAR 8200/8200/8440 Xeon Processors |
I was watching my 3PAR 8400 boot today and noticed the cpu model. I always thought the 8400 had a better cpu than the 8200. [ 1.206814] CPU0: Intel(R) Xeon(R) CPU E5-1428L v2 @ 2.20GHz stepping 04 Does anyone know the model of CPU used in the 3PAR 8440 then? |
Author: | MammaGutt [ Wed Apr 10, 2019 3:45 am ] |
Post subject: | Re: 3PAR 8200/8200/8440 Xeon Processors |
If you look at the Quickspecs: https://h20195.www2.hpe.com/v2/GetDocum ... =c04607918 you can see that 8200 and 8400 have the same node specs. I think it was the same for 7200c and 7400c as well (7200/7400 it was a difference). Based on quickspecs and specs on Intel CPUs I'm guessing Xeon E5-2470 v2 for 8440/8450. |
Author: | markinnz [ Sun Apr 14, 2019 5:46 pm ] |
Post subject: | Re: 3PAR 8200/8200/8440 Xeon Processors |
8200 and 8400 is essentially the same nodes. Output for an 8200 and 8400 : ---------------------------Node 0 CPU 0---------------------------- Node ID : 0 CPU ID : 0 Manufacturer : GenuineIntel Model : 62 (Intel(R) Xeon(R) CPU E5-1428L v2 @ 2.20GHz) Serial Number : -- Family : 6 Stepping : 4 CPU Speed(MHz) : 2194 Bus Speed(MHz) : 100.00 This is an 8440 : ---------------------------Node 0 CPU 0--------------------------- Node ID : 0 CPU ID : 0 Manufacturer : GenuineIntel Model : 62 (Intel(R) Xeon(R) CPU E5-2470 v2 @ 2.40GHz) Serial Number : -- Family : 6 Stepping : 4 CPU Speed(MHz) : 2394 Bus Speed(MHz) : 100.00 RAM is also vastly different : 8200 and 8400: Node Slot SlotID -Name-- -Usage- ---Type--- --Manufacturer--- -Serial- -Latency-- Size(MB) 0 CC_0.0 J1800041 DIMM0.0 Control DDR3_SDRAM Micron Technology 11689A3F CL5.0/11.0 8192 0 CC_1.0 J1900041 DIMM1.0 Control DDR3_SDRAM Micron Technology 11689B12 CL5.0/11.0 8192 0 DC_0.0 J140005 DIMM0.0 Data DDR3_SDRAM Micron Technology 11689A3E CL5.0/11.0 8192 0 DC_1.0 J160005 DIMM1.0 Data DDR3_SDRAM Micron Technology 11689A3D CL5.0/11.0 8192 8440: Node Slot SlotID -Name-- -Usage- ---Type--- --Manufacturer--- -Serial- -Latency-- Size(MB) 0 CC_0.0 J1800041 DIMM0.0 Control DDR3_SDRAM Smart Modular 015139C7 CL5.0/9.0 32768 0 CC_1.0 J1900041 DIMM1.0 Control DDR3_SDRAM Smart Modular 015139B0 CL5.0/9.0 32768 0 DC_0.0 J140005 DIMM0.0 Data DDR3_SDRAM Micron Technology 156FF905 CL5.0/11.0 16384 0 DC_1.0 J160005 DIMM1.0 Data DDR3_SDRAM Micron Technology 156FF900 CL5.0/11.0 16384 |
Author: | feldsam [ Tue Apr 23, 2019 1:14 pm ] |
Post subject: | Re: 3PAR 8200/8200/8440 Xeon Processors |
Hello markinnz, thank you for reply, would you please post result of this command on 8440 'shownode -svc -i' so we can see also part numbers on used RAM. Thanks. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |