HPE Storage Users Group https://www.3parug.com/ |
|
3par - 4 (four) fabric https://www.3parug.com/viewtopic.php?f=18&t=3443 |
Page 1 of 1 |
Author: | tompar [ Tue Jul 07, 2020 9:21 am ] |
Post subject: | 3par - 4 (four) fabric |
Hello, I have businness requirement, to connect 3par 8200 to 4 (four) separate fabric SAN network. It is supported. Deployment guides only shows scenario with 2 separate fabric. |
Author: | MammaGutt [ Tue Jul 07, 2020 1:25 pm ] |
Post subject: | Re: 3par - 4 (four) fabric |
Do you have any additional HBAs? With only the onboard ports you cannot make redundant paths to more than 2 fabrics and without redundant paths to each fabric you cannot fullfill best practice. |
Author: | tompar [ Tue Jul 07, 2020 11:02 pm ] |
Post subject: | Re: 3par - 4 (four) fabric |
Yes, i have additional HBA in this 3par 8200. So redundancy to all fabric will be fulfiled, but i just wonder if that is supported because I cant find in the cabling documents scenario with four separate fabric connection. |
Author: | MammaGutt [ Wed Jul 08, 2020 2:39 am ] |
Post subject: | Re: 3par - 4 (four) fabric |
Of course it supported. Just make sure partner ports are in the same fabric. |
Author: | feldsam [ Wed Jul 15, 2020 3:41 pm ] |
Post subject: | Re: 3par - 4 (four) fabric |
Hello, such a scenario I saw in the Peer Persistence guide. Check it out. |
Author: | Richard Siemers [ Fri Jul 31, 2020 11:29 pm ] |
Post subject: | Re: 3par - 4 (four) fabric |
Supported. As Mammagut mentioned, make sure partner ports are on the same fabric if you want port persistence feature to work. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |