| HPE Storage Users Group https://www.3parug.com/ |
|
| 7400 SFP+ (iSCSI) Networking https://www.3parug.com/viewtopic.php?f=18&t=544 |
Page 1 of 1 |
| Author: | drowningfish [ Mon Jan 13, 2014 10:26 pm ] |
| Post subject: | 7400 SFP+ (iSCSI) Networking |
Hello, I'm currently confused as to how the ISCSI networking is setup for the 7400 (4-node) system. With my existing Lefthand P4500 SAN I bonded the two network interfaces (per node) using link aggregation. However, with my 7400 I see 8 individual iSCSI ports but no way to bond the SFP+ interfaces between nodes 0-3 under a single LAG group. What could I be missing here? Thanks for your assistance. |
|
| Author: | Cleanur [ Tue Jan 14, 2014 5:17 am ] |
| Post subject: | Re: 7400 SFP+ (iSCSI) Networking |
The 3PAR is symmetric active / active, multipathing will use round robin load balancing so no need to use bonding etc. You can find the HP 3PAR Operating System Implementation Guides here http://goo.gl/mzM4Y7 they list all of the required steps and settings required to connect each O/S. Note they're well worth following as getting the connectivity wrong upfront may well work but could lead to issues during upgrades, maintenance etc. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|