HPE Storage Users Group https://www.3parug.com/
7400 is not connecting to Fabric https://www.3parug.com/viewtopic.php?f=18&t=604	Page 1 of 1

---

Author:	klynuser [ Thu Feb 20, 2014 10:56 am ]
Post subject:	7400 is not connecting to Fabric
Hi everyone, my newly configured 7400 is not detecting in fabric(Brocade 8/24 SANSwitch) but it works if i connect it directly to the host. And the same fabric has connected to another F400 and that is getiing coneected succesfully. here some details which may help to findout the root cause, 3par atttched fabric ports are showing as a L-port, i think that should show as F-port. In 3PAR console port summary, device type is showing as a "Free" as it should detectet as a host. i dont have external HBA so iam using onboard ports. i have attatched the 3PAR console status screenshot. Thanks for any help.. Thanks, Kalyan Attachments: screenshot.png [ 9.84 KiB | Viewed 15461 times ]

---

Author:	Cleanur [ Thu Feb 20, 2014 4:44 pm ]
Post subject:	Re: 7400 is not connecting to Fabric
You need to right click on the target FC ports, select Configure and set the Connection Type to Point for fabric connectivity. Connection type Loop is the default and is used for direct connect from the host.

---

Author:	klynuser [ Mon Feb 24, 2014 5:23 am ]
Post subject:	Re: 7400 is not connecting to Fabric
It is detecting after modifying the same . Thanks you "cleaunr".

---

Author:	eldap [ Mon Jan 26, 2015 1:39 pm ]
Post subject:	Re: 7400 is not connecting to Fabric
hello everybody im new in the forum , i have the same problem ,the fc is in green ready but the port stay en "free" :S

---

Author:	RitonLaBevue [ Mon Jan 26, 2015 2:32 pm ]
Post subject:	Re: 7400 is not connecting to Fabric
controlport offline -f n:s:p controlport config host -ct point -f n:s:p controlport rst -f n:s:p For any supposed host port...

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/