| HPE Storage Users Group https://www.3parug.com/ |
|
| showpd or other cli command to see if zero detect enabled... https://www.3parug.com/viewtopic.php?f=18&t=807 |
Page 1 of 1 |
| Author: | mohuddle [ Wed Jul 09, 2014 9:46 am ] |
| Post subject: | showpd or other cli command to see if zero detect enabled... |
showpd or other cli command to see if zero detect enabled on a volume? |
|
| Author: | Schmoog [ Wed Jul 09, 2014 11:16 am ] |
| Post subject: | Re: showpd or other cli command to see if zero detect enable |
- |
|
| Author: | 3ParDude_1 [ Wed Jul 09, 2014 3:09 pm ] |
| Post subject: | Re: showpd or other cli command to see if zero detect enable |
showvv -pol Then check Zero Detect is listed under policies for the volume in question |
|
| Author: | mohuddle [ Thu Jul 10, 2014 1:39 pm ] |
| Post subject: | Re: showpd or other cli command to see if zero detect enable |
3ParDude_1 wrote: showvv -pol Then check Zero Detect is listed under policies for the volume in question Thanks much 3ParDude_1 !!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|