| HPE Storage Users Group https://www.3parug.com/ |
|
| Email alerts for space utilisation https://www.3parug.com/viewtopic.php?f=18&t=995 |
Page 1 of 1 |
| Author: | cnkwocha [ Tue Nov 04, 2014 12:13 pm ] |
| Post subject: | Email alerts for space utilisation |
Hello All, I need to setup my storage to send email alerts when set thresholds are reached. precisely, i need to know if i can set this up for 1. VV utilisation 2. Whole storage space utilisation I have an Inserve V400 running OS 3.1.2 with only FC disks. Thanks |
|
| Author: | nsnidanko [ Tue Nov 04, 2014 4:37 pm ] |
| Post subject: | Re: Email alerts for space utilisation |
1. I am assuming you're referring to thin VV; you need to enable "Allocation Warning" under desired VV. 2. By default there are set up warnings for each disk class at 50%, 75%, 85%, 95% allocation of available capacity You need to configure SP to email these alerts. |
|
| Author: | Schmoog [ Tue Nov 04, 2014 6:38 pm ] |
| Post subject: | Re: Email alerts for space utilisation |
For the whole system, you need only enable email alerts on the sp. The whole system thresholds.should be set by default |
|
| Author: | nsnidanko [ Wed Nov 05, 2014 9:50 am ] |
| Post subject: | Re: Email alerts for space utilisation |
Additionally, you can set RAW space alert for each disk class. In IMC select array and do "Edit system" |
|
| Author: | cnkwocha [ Wed Nov 05, 2014 10:01 am ] |
| Post subject: | Re: Email alerts for space utilisation |
Thanks All, can i edit the default? can someone please guide me to get to the point of at least viewing the defaults ? i can only see where to add/edit email recipients but not the desired alerts nsnidanko, i would also like to know usage of fully provisioned volumes. i |
|
| Author: | nsnidanko [ Fri Nov 07, 2014 10:53 am ] |
| Post subject: | Re: Email alerts for space utilisation |
I believe you edit defaults via Predefining Symptoms (page 30 in HP 3PAR Service Processor Software User Guide) but better confirm with HP Support. fully provisioned volume (thick) will be always 100% provisioned  You need to monitor it inside the connected host.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|