Hi
I need to do %subj for one of my customers, i have HP permission to do it and the customer don't want HP to do it, but i don't know how.
I have 3PAR_Virtual_SP_4.2_GA_Vmware_ESX_software_QR482-11013.iso and P001 and P002 patches.
If i try to feed SP with this iso for upgrade, it didn't work.
3pardude writes
Updating the Service Processor
The HP engineer first downloaded the update for the Service Processor and Inform OS. Next he disabled alerting in the Service Processor and chose to run the Service Processor update ISO. This stage was completed quite quickly and next he moved onto loading the Inform OS to the Service Processor.
Service Processor update ISO – what is it ?!
In document HP 3PAR OS 3.1.3 MU1 Upgrade Instructions is :
The SP level must be at SP 4.2.0.GA-29 to continue with this HP 3PAR OS update
If the SP software level does not meet the requirements for this HP 3PAR OS update, you must
update the SP software before continuing with the HP 3PAR OS update installation.
If the SP level is below 4.2.0, use the HP 3PAR Service Processor Software 2.5.2 Upgrade
Instructions (PN QR482-96084) to upgrade to SP 4.1.0 (MU2) first, then follow the HP 3PAR
Service Processor Software 4.1.0 MU2 Upgrade Instructions to update the SP software to SP
level 4.2.0.
I didn't found it.
I think i know how to upgrade from 4.2.0 - for example
http://www.bitcon.be/?p=2610 ,
But how to upgrade TO 4.2.0 ?
Maybe i'm stupid and it is simple.
Thanks for help.